Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Tue Feb  9 00:09:33 CET 2010
    root@talisker.lacave.net:/usr/obj/usr/src/sys/TALISKER i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU - S         1400MHz (1396.44-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b4  Stepping = 4
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073741824 (1024 MB)
avail memory = 1036288000 (988 MB)
ACPI APIC Table: <INTEL  SCB20   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  3
 cpu1 (AP): APIC ID:  0
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
lapic3: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL SCB20> on motherboard
ACPI Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [CSB5] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to type ANY
 (20100121/dswload-808)
ACPI Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to type ANY
 (20100121/dswload-808)
acpi0: [ITHREAD]
ACPI Error: Could not enable GlobalLock event (20100121/evxfevnt-298)
ACPI Warning: Could not enable fixed event 1 (20100121/evxface-235)
ACPI Error: No response from Global Lock hardware, disabling lock (20100121/evmisc-463)
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1400-0x143f mem 0xfe9e0000-0xfe9e0fff,0xfe9a0000-0xfe9bffff irq 21 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:a5:83:89
fxp0: [ITHREAD]
fxp1: <Intel 82550 Pro/100 Ethernet> port 0x1440-0x147f mem 0xfe980000-0xfe980fff,0xfe960000-0xfe97ffff irq 20 at device 4.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:03:47:a5:83:8a
fxp1: [ITHREAD]
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xfd000000-0xfdffffff,0xfe9f0000-0xfe9f0fff irq 18 at device 12.0 on pci0
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3a0-0x3af,0x410-0x413 at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe940000-0xfe940fff irq 10 at device 15.2 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xfebe0000-0xfebe0fff irq 31 at device 8.0 on pci1
ahc0: [ITHREAD]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xfebf0000-0xfebf0fff irq 30 at device 8.1 on pci1
ahc1: [ITHREAD]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xcefff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <(0x1166)> at usbus0
uhub0: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 4 ports with 4 removable, self powered
da0 at ahc0 bus 0 scbus0 target 0 lun 0
da0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da0: Command Queueing enabled
da0: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C)
da3 at ahc1 bus 0 scbus1 target 4 lun 0
da3: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device 
da3: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da3: Command Queueing enabled
da3: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C)
da1 at ahc0 bus 0 scbus0 target 1 lun 0
da1: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da1: Command Queueing enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 scbus0 target 3 lun 0
da2: <FUJITSU MAJ3182MP 5508> Fixed Direct Access SCSI-4 device 
da2: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
da2: Command Queueing enabled
da2: 17366MB (35566478 512 byte sectors: 255H 63S/T 2213C)
lapic0: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
fxp1: link state changed to UP